
TJ's 2008 PNWC AWD Mod Setup

2008 PN Worlds AWD MOD Setup:
Blue/Gray with gold terminals chassis
ASF board with 4562 Fets double stack (2x4)
Stock steel drive shaft
ATM 8t pinion shaft
ATM 29t spur shaft
ATM titanium screws
PN ceramic balls for the diffs
PN ceramic ball bearings
PN 1.5 knuckles front
PN 2.0 knuckles rear
PN +3 wheel offset fronts
PN +2 wheel offset rear
PN green low down springs (non-metallic)
PN light blue low down springs
PN aluminum 19t pinion
Kyosho motor heat sink
Kyosho 20 Wide Rear
Kyosho 30 Narrow Front
Kyosho aluminum lug nuts (kyosho only!)
Kyosho stock plastic swing shaft
Kyosho ball diffs
Kyosho stock front toe
3Racing 98mm extension
3Racing 2 degree toe in rear






Created by Tj Macabuhay on 11.2008





