2010 RCX stock/mod set up

PN70 Stock Car and setup by Tj Macabuhay and driven by Paul Clanton.

Front:
PN aluminum upper arm
Reflex Racing kingpin polished
Kyosho stock knuckles
PN blue shim under knuckles
ATM 2x .2 shims under the knuckles
PN washer on top of delrin ball
MR02 purple low down springs
ATM delrin spring retainer/cup
ATM white spacer (comes with delrin cup kit) 
ATM blue plastic shim to pre-load front spring 
PN machine cut dish wheels
FPR front wheel spacer
PN ceramic front ball bearing
PN 20 slicks (grooved)
ATM upper arm bracket & cover kit

Rear:
PN carbon fiber #3 T-bar
PN 94-98mm v1 motor mount
PN ultra light diff shaft
QTEQ diff kit
PN ceramic balls (5x only)
PN stock 64 pitch 52t spur
Kyosho pressure plates
ATM dish wheels
kyosho 20 radials
PN ceramic ball bearings
PN 70 turn motor (hand out)
PN 14 tooth pinion
PN damper disc v2 (polished with 1500 grit)
PN damper post
PN DDS spacer/shock mount
PN damper plate
PN green top spring
ATM green bottom spring

Body:
Ferrari 430GT custom spoiler (same weight as stock)

Battery:
R1 750 matched and charged at 1.0 volts

Transmitter:
Futaba 3PKs

Awesome visor by Dominick Garza.

Mod Car by Tj

Front:

stock upper arm
Kyosho flourine ball
Reflex Racing long king pin
Kyosho stock knuckles
kyosho 2x stock black shims under the knuckles
ATM 1x .2 shims under the knuckles
PN spacer on top of the upper arm
PN purple reg height springs
ATM spring retainer/cup
PN delrin 0 wheels
PN20 slick grooved
PN steel bearings

Rear:
PN carbon fiber #3 T-bar
PN 94-98mm v1 motor mount
PN ultra light diff shaft
QTEQ diff kit
PN ceramic balls (5x only)
PN LSD 64 pitch 52t spur
Kyosho pressure plates
PN dish wheels
PN 6 radials
PN steel ball bearings
PN35 turn motor (brand new)
PN 11 tooth pinion
PN damper disc v2 (polished with 1500 grit)
PN damper post
PN DDS spacer/shock mount
ATM damper plate
PN blue top spring
PN green bottom spring
3 grams of weigh attached in the rear under the body.

Thanks! 

-Tj Macabuhay